Quantity

Typical No.

Description

Busbar extension

+J01

=JZ01

Ring-main feeder (310 mm)

+J02

=JZ01

Ring-main feeder (310 mm)

+J03

=JZ02

Transformer feeder (430 mm)

+J04

=JZ02

Transformer feeder (430 mm)

+J01,+J02,+J03,+J04

8DJH Block

Item No.

Quantity

Description

Typical no.

4.1

2

Ring-main feeder (310 mm)

=JZ01

Panel width: 310 mm

Rated feeder current: 630 A

equipped with the following components

4.1.1

Three-position switch-disconnector

Switching device for disconnecting and earthing of the feeder (disconnector function with load breaking capacity, make-proof earthing function)

Mode of operation for the switch-disconnector:

with manual operating mechanism for DISCONNECTING function (On-Off)

Mode of operation for the make-proof earthing switch:

with manual operating mechanism

Design of operating mechanism: spring-operated mechanism

Functions (for manual or motor operation): spring CLOSED-OPEN

With locking device: for padlock

Release: 

5.1.6

Panel connection

Possibility of connection for solid-insulated cable plugs to the vessel bushings in the connection compartment

Connection compartment provided for leading the following out of the panel:

1 cable

downwards

Connection to bushing (outside-cone system:

interface type C (EN 50181) with bolted contact M16 (630 A)

Cable compartment cover: standard

Available depth for cable plugs: 298 mm

Panel depth 775 mm

Cable fixing:

with 1 cable bracket and C-rail

Pre-assembled cable clamps with,  D=36-52 mm

The cable compartment is prepared for installation of the cable plug.

Make: nkt cables

Type: 1x AB 24-630 Typ 03

Cable cross-section:

240 mm²

5.1.6

Capacitive voltage detecting system at the feeder

Design:

LRM system (low-resistance modified) with integrated indicator, type VOIS+ for the selected operating voltage

4.1.1

without, prepared for installation

without delivery by the factory

installation prepared (for supply "on site")

4.1.4

Customer-specific designs

1

1x Position 2:

Floor cover with pressure release flap for panels with pressure relief to the bottom.

Panel width 310 mm

Suitable for:

1x 3-core cable (max. cable Ø 100mm)

Item No.

Quantity

Description

Typical no.

4.1

2

Transformer feeder (430 mm)

=JZ02

Panel width: 430 mm

Rated feeder current: 200 A

equipped with the following components

4.1.1

Three-position switch-disconnector

Switching device for disconnecting and earthing of the feeder (disconnector function with load breaking capacity, make-proof earthing function)

Mode of operation for the switch-disconnector:

with manual operating mechanism for DISCONNECTING function (On-Off)

Mode of operation for the make-proof earthing switch:

with manual operating mechanism

Design of operating mechanism: Spring-operated/stored-energy mechanism

Functions (for manual or motor operation): Storage ON-OFF

With locking device: for padlock

HV HRC fuse assembly

Rated voltage: 24.0 kV

Fuse slide, dimension e in mm: 442 mm

with three-pole tripping for HV HRC fuse

5.1.6

Panel connection

Possibility of connection for solid-insulated cable plugs to the vessel bushings in the connection compartment

Connection compartment provided for leading the following out of the panel:

1 cable

downwards

Connection to bushing (outside-cone system:

interface type A (EN 50181) with plug-in contact (250 A)

Cable compartment cover: standard

Available depth for cable plugs: 374 mm

Panel depth 775 mm

Cable fixing:

with 1 cable bracket and C-rail

Pre-assembled cable clamps with,  D=26-38 mm

In the standard design, the cable compartment is provided for the panel connection. Depending on the cables or cable plugs used, retrofitting may be required.

5.1.6

Capacitive voltage detecting system at the feeder

Design:

LRM system (low-resistance modified) with integrated indicator, type VOIS+ for the selected operating voltage

4.1.4

Customer-specific designs

1

1x Position 1:

8DJH ENHANCED fuse box for compl. one T-panel

Supply contains the additional costs for the ENHANCED version.

The offer is not valid for spare parts orders.

1

1x Position 5:

Floor cover with pressure release flap for panels with pressure relief to the bottom.

Panel width 430 mm

Suitable for:

1x 3-core cable (max. cable Ø 100mm) or

3x 1-core cable (max. cable Ø 52mm)

Only for T-panels.

Item No.

Quantity

Description

Typical No. =JZ00

1

Oper. lever (bk) for rot. oper. mech. (DISCONNECTING/EARTHING, LS 2)

1

Operating instructions 8DJH for blocks, English

1

Operating instructions - 1st copy free of charge

1

Construction Cost for KuKo No.003693

1

Construction Cost for KuKo No.003479